Usage: TRANSX95 [Option]

Control Line Arguments:

        +Cn   -  Case state, used for debugging. n 1-10. Contact ITS Systems
                 for a more detailed description.

        +Rn   -  Used to control the screen resolution. n=1-80x25,n=2-20x28
                 n=3-80x50

        +VC   -  Enable the internal video cache.

        +MEM  -  Conserve conventional memory where possible.

        +SVn  -  Use video interface. n=0-Default,n=1-Use TTY,n=2-Use BIOS.

        +LB   -  Use low intensity background colors.

        +LF   -  Use low intensity foreground colors.

        -CPU  -  Bypass the CPU detection and speed test.(Maybe needed on
                 100MHZ and above processors).

        -B    -  Disable the Typematic error reporting mode.

        -L    -  Bypass the low conventional memory test.

        -VSB1 -  Video set back switch, default is set back video, if this
                 switch is used the video setup by the program remain in
                 effect even after termination.

        -Pn   -  Set virtual memory type priority sequence, n=1-XDL,n=2-XLD
                 n=3-DXL,n=4-DLX,n=5-LXD,n=6-LDX. Where X=Extended memory,
                 D=Disk memory, and L=Conventional memory.

        -In   -  Set virtual memory security level. n=0-LOW,n=1-HIGH.

        -? /? -  Show help screen.

        -A    -  Update B/I to I with each video pass.

        -NM   -  Bypass mouse initialization, even if a mouse is present in
                 the system. (Will not use the mouse)

        +WBC  -  Do not check for Windows 95 when doing Transfer Boot Code.

        +BW   -  Disables all color display. Use for Monochrome & LCD
                 displays.

        -HER  -  Disable hardware error reporting (Dafault FAIL).

        -RPT  -  Disable the generation of a transfer error report file.

        -NCT  -  Disable the test for compressed drives on startup.